-
Industrial Multi-Effect Falling Film Evaporator For Production Line
Falling film evaporation is to add the material liquid from the upper tube box of the heating chamber of the falling film evaporator, and distribute it evenly into the heat exchange tubes through the liquid distribution and film forming device. Under the action of gravity, vacuum induction and air flow, it becomes a uniform film. Flow from top to bottom. During the flow process, it is heated and vaporized by the heating medium in the shell side. The generated steam and liquid phase enter the separation chamber of the evaporator. After the vapor and liquid are fully separated, the steam enters the condenser for condensation (single-effect operation) or enters the next-effect evaporator as The medium is heated to achieve multi-effect operation, and the liquid phase is discharged from the separation chamber.
-
customized Falling Film Evaporator Mvr for ethanol milk juice Jam food
Application
Multi-effect Evaporation system is suitable to food and drink processing, pharmaceutical, chemical, biological engineering, environmental engineering, waste recycling and other sectors of high concentration, high viscosity, also with insoluble solids to low concentration.Multi-effect Evaporation system can widely used in the concentration of the glucose, starch sugar, maltose, milk, juice, vitamin C, maltodextrin and other aqueous solution. And also widely used in liquid waste disposal such as industry field of gourmet powder, alcohol and fishmeal.
-
Multi effect falling film vacuum evaporator juice evaporators price
Application
Multi-effect Evaporation system is suitable to food and drink processing, pharmaceutical, chemical, biological engineering, environmental engineering, waste recycling and other sectors of high concentration, high viscosity, also with insoluble solids to low concentration.Multi-effect Evaporation system can widely used in the concentration of the glucose, starch sugar, maltose, milk, juice, vitamin C, maltodextrin and other aqueous solution. And also widely used in liquid waste disposal such as industry field of gourmet powder, alcohol and fishmeal.
-
Multi Effect Falling Film Evaporator / Thin Film Evaporator
Falling film evaporation is to add the feed liquid from the upper tube box of the heating chamber of the falling film evaporator, and distribute it evenly into each heat exchange tube through the liquid distribution and film forming device. Under the influence of gravity and vacuum induction and air flow, it forms a uniform film. Flow up and down. During the flow process, it is heated and vaporized by the shell-side heating medium, and the generated steam and liquid phase enter the separation chamber of the evaporator together. After the vapor and liquid are fully separated, the steam enters the condenser to condense (single-effect operation) or enters the next-effect evaporator as The medium is heated to achieve multi-effect operation, and the liquid phase is discharged from the separation chamber.
-
Multi Effect Falling Film Evaporator / Thin Film Evaporator
Falling film evaporator is a reduced-pressure distillation unit for concentrating liquid. The liquid to be vaporized is sprayed onto the heat exchange tube from the upper heat exchanger, and a thin liquid film is formed on the heat exchange tube. In this way, the static liquid level pressure is reduced when the liquid is boiling and evaporating, so as to improve the heat exchange and evaporation efficiency. It is commonly used in food, medical, chemical and other related industries.
-
industrial pharmaceutical falling film evaporation concentrator
Principle
The raw material liquid is distributed into each evaporation pipe unfirmly, under the function of gravity, liquid flow from top to bottom, it becomes the thin film and heat exchanging with steam. Generated secondary steam go along with the liquid film, it increases the liquid flow speed, heat exchanging rate and reduces the retention time. Fall film evaporation fits for heat sensitive product and there’s very less product loss because of bubbling.
-
Milk Juice Vacuum Single Effect Falling Film Evaporator Ethanol
Introduce
Falling film evaporator is a reduced-pressure distillation unit for concentrating liquid. The liquid to be vaporized is sprayed onto the heat exchange tube from the upper heat exchanger, and a thin liquid film is formed on the heat exchange tube. In this way, the static liquid level pressure is reduced when the liquid is boiling and evaporating, so as to improve the heat exchange and evaporation efficiency. It is commonly used in food, medical, chemical and other related industries.
-
Multi Effect juice vacuum evaporator / milk vacuum evaporator
Feature
1 It has short heating time, fits for heat sensitive product. Continuous feeding & discharging, product could get concentrated in one time, and retention time is less than 3 minutes
2 Compact structure, it could finish product pre-heating and concentrating in one time, to save the extra cost of pre-heater, reduce the risk of cross contamination, and occupied space
3 It fits for processing high concentrated & high viscosity product
4 Three effect design saves steam
5 The evaporator is easy for clean, there’s no need of dismantle when cleaning the machine
6 Half Automatic operation
7 No product leakage
-
FFE Falling Film Evaporator Film Of Ethanol Evaporation
Introduce
Falling film evaporation is to add the material liquid from the upper tube box of the heating chamber of the falling film evaporator, and distribute it evenly into the heat exchange tubes through the liquid distribution and film forming device. Under the action of gravity, vacuum induction and air flow, it becomes a uniform film. Flow from top to bottom. During the flow process, it is heated and vaporized by the heating medium in the shell side. The generated steam and liquid phase enter the separation chamber of the evaporator. After the vapor and liquid are fully separated, the steam enters the condenser for condensation (single-effect operation) or enters the next-effect evaporator as The medium is heated to achieve multi-effect operation, and the liquid phase is discharged from the separation chamber.
-
Industrial Equipment Falling Film Evaporation Concentrator
Falling film evaporation is to add the material liquid from the upper tube box of the heating chamber of the falling film evaporator, and distribute it evenly into the heat exchange tubes through the liquid distribution and film forming device. Under the action of gravity, vacuum induction and air flow, it becomes a uniform film. Flow from top to bottom. During the flow process, it is heated and vaporized by the heating medium in the shell side. The generated steam and liquid phase enter the separation chamber of the evaporator. After the vapor and liquid are fully separated, the steam enters the condenser for condensation (single-effect operation) or enters the next-effect evaporator as The medium is heated to achieve multi-effect operation, and the liquid phase is discharged from the separation chamber.
-
Stainless steel vacuum single effect falling film FFE evaporator
Range of application
Suitable for evaporation concentration is lower than the saturation density of salt material, and heat sensitive, viscosity, foaming, concentration is low, liquidity good sauce class material. Especially suitable for milk, glucose, starch, xylose, pharmaceutical, chemical and biological engineering, environmental engineering, waste liquid recycling etc for evaporation and concentration, low temperature continuous has high heat transfer efficiency, shorter time for heating the material, etc main features.
Evaporation capacity: 1000-60000kg/h(Series)
In consideration of each factories all kinds of solutions with different characteristics and complexity, our company will provide specific technical scheme according to client’s requirements, reference for users to choose!
-
Triple-effect fall film evaporator
Principle
The raw material liquid is distributed into each evaporation pipe unfirmly, under the function of gravity, liquid flow from top to bottom, it becomes the thin film and heat exchanging with steam. Generated secondary steam go along with the liquid film, it increases the liquid flow speed, heat exchanging rate and reduces the retention time. Fall film evaporation fits for heat sensitive product and there’s very less product loss because of bubbling.
