Products
Food grade magnetic mixer blending tank bottom magnetic stirring tank
Specification
1.Capacity:50L-50000L
2.Materical:SS304 and SS316
3.Single layer/Double layers/Three layers
4.Polished inside and outside
5.Quick open manhole
6.Agitator Power:0.25-15KW
Product Specification
|
Model |
Volume(L) |
Blending Power(KW) |
Blending Speed(r/min) |
Homogenizing Power(KW) |
Homogenizing Rotation Speed(r/min) |
Heating Method |
|
GTM-100 |
100 |
1.5 |
0-63 |
4.0 |
0-3200 |
Steam Heating Or Electric Heating |
|
GTM-200 |
200 |
1.5 |
0-63 |
4.0 |
0-3200 |
|
|
GTM-500 |
500 |
3.0 |
0-63 |
7.5 |
0-3200 |
|
|
GTM-1000 |
1000 |
4.0 |
0-63 |
11 |
0-3200 |
|
|
GTM-2000 |
2000 |
7.5 |
0-63 |
11-15 |
0-3200 |
|
|
GTM-3000 |
3000 |
7.5-11 |
0-63 |
15-18.5 |
0-3200 |
|
|
GTM-5000 |
5000 |
11-15 |
0-63 |
18.5-22 |
0-3200 |
● Welded isolation sleeve static dead seal replaces dynamic mechanical seal, that completely solves the leakage problem of dynamic mechanical seal.
●Simple structure, easy to disassemble and clean, no dead corner.
●The agitator is installed at the bottom, and the mixing blade is unique in design, which can be adapted to agitation and mixing of various media, and can be stirred in the case of few materials. Simple structure, easy to disassemble, easy to clean, no dead ends.
● The standardized design allows the excellent components to be interchanged on different mixers.
The sanitary magnetic stirrer is mainly designed for the GMP standard of the pharmaceutical, biological, food and other industries. It has the characteristics of small size, reasonable structure, excellent performance and reliable use. It is a stirring device suitable for various stainless steel reaction tanks and liquid tanks. It is mainly composed of inner magnetic steel, outer magnetic steel, isolation sleeve and transmission motor.
The parts in contact with materials are all made of stainless steel 316L/304, and it is through the permanent magnet coupling to drive the stirring shaft to work. It uses the static seal of the insulating sleeve isolation method to replace the dynamic seal of the drive shaft which completely solves various unavoidable leakage problems of mechanical seal.
The rotation of the stirring impeller produces a vortex, and the soluble powder or liquid material is sucked into the vortex and quickly sucked into the stirring impeller. The centrifugal force of the impeller rotation impinges the material radially from the outer diameter of the impeller onto the tank wall. The material rises and circulates under the action of the collision force, and is then sucked back to the suction end of the impeller. The thrust of the impeller makes the material continuously move and stir, and is homogenized, mixed, dissolved and dispersed, and finally a stable and fine product is formed.
ately 48 hours prior to the date of delivery to schedule a delivery time. If you need to delay the final delivery, there will be a "pull" fee of approximately $100, and a storage fee of approximately $150 per shipping container per day.
