Stainless Steel Cosmetics Cream Yogurt Vacuum Emulsification Tank

Short Description:

Structure and character

The function of the emulsification tank is to dissolve one or more materials (water-soluble solid phase, liquid phase or colloid, etc.) in another liquid phase, and hydrate it into a relatively stable emulsion. It is widely used in the emulsification and mixing of raw and auxiliary materials such as edible oils, powders and sugars. Emulsification tanks are also used for emulsification and dispersion of some coatings and paints, especially for some insoluble colloidal additives such as CMC, xanthan gum, etc.

Product Detail

Product Tags


1. Operating Performance
Mixing tank with accessories (such as manhole ,inlet and outlet and valve etc.) are easy to operate and observe.
2.Health Performance
Tank equipped with standard dished top and bottom type.All joints and inside of the tank is mirror finished without any dead angle and cleaned easily(Sanitary design). Surface roughness Ra ≤ 0.22μm.
3.Insulation Performance
Insulation material is polyurethane foam, PU thickness up to 50 ~+100mm, insulation stability (24h temperature 2 ℃), heat medium low consumption of fast temperature changes can radically improve productivity and reduce the use of cost.
4.Appearance Performance
Inner mirror polished and outside mat polished , outside roughness Ra ≤ 0.8μm.
Tank with mainly by the tank body, insulation and accessories. Tank body including the inner and, cladding ,jacket and legs, etc.; polyurethane foam to be insulation layer ; Tank accessories include reduction gear,control box, agitator ,frequency converter ,CIP spary ball and temperature sensor, level sensor ,suitable inlet and outlet etc .Mixing motor be fitted on the top of tank for mixing.More information please see the confirmed drawings.

Main Feature

This unit adopts the upper coaxial three-heavy agitator, the hydraulic lifting and opening the cover, the speed of the fast homogenizing agitator: 0-3000r/min (frequency conversion speed regulation), and the slow-speed wall scraping agitator, which automatically adheres to the bottom and wall of the tank. Vacuum suction is adopted, especially for powder materials to avoid dust flying. The whole process is carried out under vacuum conditions to prevent the material from generating air bubbles after high-speed stirring, which can meet the requirements of sanitation and sterility. The system is equipped with a CIP cleaning system, the contact part between the container and the material is made of SUS316L material, and the inner surface is mirror-polished (sanitary).
This unit is easy to operate, stable in performance, good in homogeneity, high in production efficiency, convenient in cleaning, reasonable in structure, small in floor space and high in automation.


  • Previous:
  • Next:

  • Write your message here and send it to us