-
Stainless steel dairy juice beverage emulsifying mixing tank
Structure and character
Emulsification tank is used to mix one or several materials (water solublesolid, liquid or jelly) with other liquid and then to hydrate it into Emulsionliquid.Chinz homogenization agitator can apply together with Center blade agitator and scraped suface agitatot. That is the best agitator combination.The Emulsification tank adopts vertical circular design with dimple jacket, coil jacket and full jacket both for cooling and heating. The tilting bottom design is well for emptying. There are 316L and 304 stainless material for choosing.
-
stainless steel mixing tank chemical homogenizer emulsifier tank
Structure and character
The function of an emulsifying tank is to dissolve one or more materials (water-soluble solid phase, liquid phase or gelatinous, etc.) in another liquid phase and hydrate them into a relatively stable emulsion. Widely used in edible oil, powder, sugar and other raw materials emulsification mixing, some coatings, paint emulsification dispersion also use emulsification tank, especially suitable for some difficult sol additives such as CMC, xanthan gum.
The unit is easy to operate, stable performance, good homogeneity, high production efficiency, convenient cleaning, reasonable structure, less area, high degree of automation. -
Stainless Steel Cosmetics Cream Yogurt Vacuum Emulsification Tank
Structure and character
The function of the emulsification tank is to dissolve one or more materials (water-soluble solid phase, liquid phase or colloid, etc.) in another liquid phase, and hydrate it into a relatively stable emulsion. It is widely used in the emulsification and mixing of raw and auxiliary materials such as edible oils, powders and sugars. Emulsification tanks are also used for emulsification and dispersion of some coatings and paints, especially for some insoluble colloidal additives such as CMC, xanthan gum, etc.
-
High shear Homogeneous Emulsification Tank Machinery Equipment
Structure and character
Emulsification tank is used to mix one or several materials (water solublesolid, liquid or jelly) with other liquid and then to hydrate it into Emulsionliquid.Chinz homogenization agitator can apply together with Center blade agitator and scraped suface agitatot. That is the best agitator combination.The Emulsification tank adopts vertical circular design with dimple jacket, coil jacket and full jacket both for cooling and heating. The tilting bottom design is well for emptying. There are 316L and 304 stainless material for choosing.
-
Chinz Bottom Emulsifying Tank Vacuuming Dairy Mixer Machine
Structure and character
The function of the emulsification tank is to dissolve one or more materials (water-soluble solid phase, liquid phase or colloid, etc.) in another liquid phase, and hydrate it into a relatively stable emulsion. It is widely used in the emulsification and mixing of raw and auxiliary materials such as edible oil, powder and sugar. Emulsification tanks are also used for emulsification and dispersion of some coatings and paints, especially for some insoluble colloidal additives such as CMC, xanthan gum, etc.
The emulsification tank is a three coaxial stirring mixer suitable for stable homogeneous emulsification. The resulting particles are very small. The quality of the emulsification depends on how the particles are dispersed during the preparation stage. The smaller the particles, the tendency to aggregate on the surface The weaker, and thus the less chance of the emulsification being broken.
Relying on the mixing action of the reversing blades, the high-quality emulsification mixing effect is obtained under the processing conditions of the homogeneous turbine and the vacuum state. -
Food grade magnetic mixer blending tank bottom magnetic stirring tank
Magnetic mixing tank has characteristics of no leakage, fully sealed, corrosion resistance and energysaving. Because of its non-contact transmission torque, taking static seal to replace dynamic seal, it solves the leakage problem that other shaft seals cannot overcome. Since all materials and the stirring components operate in a sterile and sanitary state, the magnetic stirring tank is an ideal replacement for processing machines in the industries of pharmaceutical, fine chemicals, cosmetics and bioengineering.It is a sterile liquid mixing tank with stirring device installed at the bottom or sideways if necessary, enabling CIP and SIP.
-
Alcoholic Sediment Alcohol Precipitation Tank
Structure and character
The equipment is a round barrel with a layed ellipse head,cone bottom, a propeller-like mixing speed-reducer inside, a special, mini-adjusted, revolving out-liquid tube and an in-material valve,frozen salt water or cooled water can go through barrel layer to cool down liquid material indirectly and control the temperature of liquid sediment,you’d better seperate liquid from solid in low temperature frozen state so as to improve the purity.
-
And Cooling Mixing Tank With Agitator
Introduction
1.Made of single-layer or double-layer or triple-layer stainless steel structure.
2.Materials are all sanitary stainless steel SUS 304/316L.
3.Humanized structure design and easy to operate.
4.Transition area of interior wall on tank adopts arc for transition to ensure no dead corner of sanitation.
5.Heat type:electric heating jacket ,hot water jacket etc you can choose
-
Stainless Steel Mixing Tank Liquid Chemical Blending Mixer Tank
Structure characteristics:
1.Made of single-layer,double layer or three layer stainless steel structure.
2.Materials are all sanitary stainless steel.
3.Humanized structure design and easy to operate.
4.Transition area of interior wall on tank adopts arc for transition to ensure no dead comer of sanitation.
-
Jacket Mixer Stainless Steel Mixing Tank Agitator Tank
Double opening on the upper flat cover, lower flat bottom, bottom discharge, vertical three feet.Main functions of the electric-heating mixing tank: heating (heating the medium in the jacket by the heaters, transferring heat energy, and indirectly heating the material in the tank, with automatic temperature control), heat insulation, cooling and stirring.
-
Stainless Steel mixing tank with agitator
Structure:
Stainless steel mixing tanks are widely applied in the beverage, food, dairy, pharmaceutical, chemical and process industries used as blender tank, buffer tank and storage tank, which cleanable to sanitary standards .
1. Material:SUS304 and SUS 316L available
2. Capacity:50L-20000L
3. Widely used in food, beverage,dairy,pharmacy Industries
4. Single layer /Double layers( for heating or cooling )/Three layers ( insulation )
5. Mirror/Matt Polished inside and outside
6.Three feet
Also could be made according to customers’ requirement
-
Liquid Soap Lotion Making Machine Cream Stainless Steel Mixng Tank
Introduction
250L Electric heating style hand sanitizer liquid soap shampoo blending machine is our latest product research and developed by our company which combined overseas superior emulsifier experience with domestic cosmetic enterprise feedback. This machine adopts imported stainless steel, scientific homogenizing system, reasonable scraper blending to ensure equivalent homogenizing and make product more smooth, even and bright.
